About Course
Chemical engineering is a branch of engineering that uses principles of chemistry, physics, mathematics, biology, and economics to efficiently use, produce, design, transport and transform energy and materials.
What I will learn?
- 400+ Hrs Live Recorded Lectures
- Free Test Series, CTQ Videos and Ebooks Included
- Recorded by Best Mentors across the country from IIT/IISc
Course Curriculum
CRE (Latest)
Chapter 1: CRE Lecture 01 – 25
E-Book – CRE (Latest)
-
E-Book
Practice Set – CRE (Latest)
-
Practice Set 1
-
Practice Set 2
Thermodynamics (NEW)
Chapter 1: Thermodynamics lecture 1-22 (NEW)
E-Book – Thermodynamics (NEW)
-
E-Book
Practice Set – Thermodynamics (NEW)
-
Practice Set 1
-
Practice Set 2
Quantitative Aptitude
Chapter 1: Numbers System
-
1.1 – Types of Numbers
00:00 -
1.2 – Divisibility Rules
00:00 -
1.3 – Cyclicity or Fundamental to Find Last Digit
00:00 -
1.4 – Concept of HCF/LCM and Its Application
00:00 -
1.5 – Remainders
00:00 -
1.6 – Highest Power and Trailing Zeros
00:00 -
1.7 – Factors
00:00 -
1.8 – Number System Exam Questions
00:00 -
1.9 – Cyclicity – Last Digit (Unit Place)
00:00 -
1.10 – Cyclicity – Last 2 Digits
00:00 -
1.11 – Remainder Theorem
00:00 -
1.12 – Base System
00:00 -
1.13 – Right Most Non-zero Digit
00:00
Chapter 2: Percentages and Application
-
2.1 – Introduction to Percentage
00:00 -
2.2 – Change of Base
00:00 -
2.3 – Profit Loss and Discount Concept
00:00 -
2.4 – Simple Interest and Compound Interest
00:00 -
2.5 – Faulty Weights
00:00 -
2.6 – Successive Percentage Change
00:00 -
2.7 – Percentage Exam Questions
00:00
Chapter 3: Ratio, Proportion, and Mixtures
-
3.1 – Introduction to Ratio
00:00 -
3.2 – Introduction to Proportion
00:00 -
3.3 – Partnership
00:00 -
3.4 – Alligation & Mixture
00:00 -
3.5 – Ratio & Proportion Exam Questions
00:00
Chapter 4: Time, Speed, and Distance
-
4.1 – Relation between Time, Speed & Distance
00:00 -
4.2 – Average Speed
00:00 -
4.3 – Relative Speed
00:00 -
4.4 – Boats & Stream
00:00 -
4.5 – Races
00:00 -
4.6 – Time, Speed & Distance Exam Questions
00:00
Chapter 5: Time and Work
-
5.1 – Introduction to Time & Work
00:00 -
5.2 – Different Types of Questions of Time & Work
00:00 -
5.3 – Time & Work Exam Questions
00:00
Chapter 6: Geometry
-
6.1 – Angles
00:00 -
6.2 – Triangles & Properties
00:00 -
6.3 – Quadrilateral
00:00 -
6.4 – Circle
00:00 -
6.5 – Polygon
00:00 -
6.6 – Trigonometry
00:00 -
6.7 – Geometry & Mensuration (Higher Concept)
00:00 -
6.8 – Mensuration
00:00 -
6.9 – Geometry Exam Questions
00:00
Chapter 7: Permutation and Combination
-
7.1 – Arrangement Based on Alphabets
00:00 -
7.2 – Arrangement Based on Numbers
00:00 -
7.3 – Rank in Dictionary
00:00 -
7.4 – Combination
00:00 -
7.5 – Application of Combination
00:00 -
7.6 – Permutation
00:00 -
7.7 – Permutation & Combination Exam Questions
00:00
Chapter 8: Probability and Set Theory
-
8.1 – Introduction to Probability
00:00 -
8.2 – Types of Questions of Probability
00:00 -
8.3 – Probability Exam Questions
00:00
Chapter 9: Algebra
-
9.1 – Linear Equation
00:00 -
9.2 – Quadratic Equation
00:00 -
9.3 – Introduction to Progression
00:00 -
9.4 – Logarithm
00:00 -
9.5 – Logarithm Practice
00:00 -
9.6 – Modulus
00:00 -
9.7 – Inequality
00:00 -
9.8 – Algebra Exam Questions
00:00
Chapter 10: Set Theory
-
10.1 – Set Theory
00:00
Chapter 11: Previous Year Aptitude GATE Questions
-
11.1 – Aptitude GATE Questions 2018 ME
00:00 -
11.2 – Aptitude GATE Questions 2018 EC
00:00 -
11.3 – Aptitude GATE Questions 2018 CE
00:00 -
11.4 – Aptitude GATE Questions 2018 CS
00:00 -
11.5 – Aptitude GATE Questions 2017 CH
00:00 -
11.6 – Aptitude GATE Questions 2016 EE
00:00 -
11.7 – Aptitude GATE Questions 2016 EC
00:00 -
11.8 – Aptitude GATE Questions 2019 All Branches
00:00 -
11.9 – Aptitude GATE Questions 2015 CS
00:00 -
11.10 – Aptitude GATE Questions 2015 ME
00:00 -
11.11 – Aptitude GATE Questions 2015 EC + IN
00:00
E-Book – Quantative Aptitude
-
E-Book
Practice Set – Quantative Aptitude
-
Practice Set 1
-
Practice Set 2
Engineering Mathematics
Chapter 1: Limit
-
1.1 Introduction to Limit
00:00 -
1.2 Indeterminate forms
00:00 -
1.3 Methods to Solve Limit
00:00 -
1.4 Factoring Method
00:00 -
1.5 Rationalisation method
00:00 -
1.6 Expansion method
00:00 -
1.7 L-Hospital Rule
00:00 -
1.8 Failure of L-Hospital Rule
00:00 -
1.9 Approximation method
00:00 -
1.10 Limit involving modulus function
00:00 -
1.11 Limit involving Riemann integration
00:00 -
1.12 Limit involving greatest integer function
00:00 -
1.13 Various exams questions and practice questions
00:00
Chapter 2: Continuity
-
2.1 Introduction to Continuity
00:00 -
2.2 Types of Continuity
00:00 -
2.3 Types of Discontinuity
00:00 -
2.4 Continuity in an interval [a,b]
00:00 -
2.5 Continuity of P(X)/Q(X)
00:00 -
2.6 Continuity of modulus function
00:00 -
2.7 Various exam questions and practice question
00:00
Chapter 3: Differentiability
-
3.1 Introduction to differentiability
00:00 -
3.2 Differentiability of modulus function
00:00 -
3.3 Various exam questions
00:00
Chapter 4: Properties of Function
-
4.1 Monotone function
00:00 -
4.2 Increasing and decreasing function
00:00 -
4.3 Concave upward and downward
00:00 -
4.4 Point of inflection
00:00
Chapter 5: Maxima & Minima
-
5.1 Local maxima & local minima
00:00 -
5.2 Absolute maximum and absolute minimum
00:00 -
5.3 Maximum & minimum value of a function in the given interval
00:00
Chapter 6: Min Value Theorem
-
6.1 Intermediate MVT
00:00 -
6.2 Integral form of intermediate MVT
00:00 -
6.3 Rolle’s MVT
00:00 -
6.4 Lagrange’s MVT
00:00 -
6.5 Integral form of Lagrange’s MVT
00:00 -
6.6 Cauchy’s MVT
00:00 -
6.7 Various exam questions
00:00
Chapter 7: Integration
-
7.1 Integration
00:00 -
7.2 Arc length
00:00
Chapter 8: Linear Algebra
-
8.1 Linear Transformation
00:00 -
8.2 Introduction to matrices
00:00 -
8.3 Rank & Nullity
00:00 -
8.4 System of Linear equations
00:00 -
8.5 Eigen values & Eigen Vectors
00:00 -
8.6 Number of linearly independent Eigen Vectors
00:00 -
8.7 Diagonalization of matrix
00:00 -
8.8 Some important properties of special matrices
00:00 -
8.9 Gate questions
00:00
Chapter 9: Probability Distribution
-
9.1 Discrete probability distribution
00:00 -
9.2 Binomial distribution
00:00 -
9.3 Poisson distribution
00:00 -
9.4 Continuous probability distribution
00:00 -
9.5 Uniform distribution
00:00 -
9.6 Exponential distribution
00:00 -
9.7 Normal distribution
00:00 -
9.8 Mean, Median and mode of probability distribution
00:00 -
9.9 Expectation, second moment, variance and standard deviation
00:00 -
9.10 Cumulative Distribution
00:00 -
9.11 Joint probability distribution
00:00 -
9.12 Gate questions
00:00
Chapter 10: Statistics
-
10.1 Statistics
00:00
Chapter 11: Differential Equation
-
11.1 Introduction to Differential equation
00:00 -
11.2 Order and degree of Differential equation
00:00 -
11.3 Ordinary and partial differential equation
00:00 -
11.4 Linear and nonlinear differential equations
00:00 -
11.5 Homogeneous and nonhomogeneous differential equations
00:00 -
11.6 Methods to solve first order first degree differential equations
00:00 -
11.7 Variable separable method
00:00 -
11.8 Leibniz differential equations
00:00 -
11.9 Bernoulli’s differential equations
00:00 -
11.10 Differential equations with homogeneous function
00:00 -
11.11 Differential equation dy/dx=f(ax+by+c)
00:00 -
11.12 Higher order differential equations with constant coefficients
00:00 -
11.13 Higher order differential equations with variable coefficients
00:00 -
11.14 Partial differential equations
00:00 -
11.15 Gate questions
00:00
Chapter 12: Numerical Methods
-
12.1 Numerical Integration
00:00 -
12.2 Numerical Differentiation
00:00 -
12.3 Roots of Equation
00:00
Chapter 13: Complex Analysis
-
13.1 Introduction to complex numbers
00:00 -
13.2 Limit, continuity and differentiability
00:00 -
13.3 Analytic functions
00:00 -
13.4 Entire function
00:00 -
13.5 Complex differentiation
00:00 -
13.6 Zeros & Singularity: Poles, essential singularity, Harmonic singularity
00:00 -
13.7 Residues at poles and essential singularity
00:00 -
13.8 Complex integration – Open path closed path
00:00 -
13.9 Gate questions
00:00
Chapter 14: Vector Analysis
-
14.1 Vector Analysis
00:00
Chapter 15: Laplace Transform
-
15.1 Laplace Transform
00:00
E-Book – Engineering Mathematics
-
E-Book
Practice Set – Engineering Mathematics
-
Practice Set 1
-
Practice Set 2
GATE – 21 ADDED SYLLA
Chapter 1: Fluid Mechanics and Mechanical Operations
-
1.1 Fluid Mechanics and Mechanical Operations
00:00
Chapter 2: Heat Transfer
-
2.1 Heat Transfer
00:00
Chapter 3: Mass Transfer
-
3.1 Membrane Separations – Mass Transfer
00:00
Chapter 4: Chemical Reaction Engineering
-
4.1 Chemical Reaction Engineering
00:00
Chapter 5: Instrumentation and Process Control
-
5.1 Instrumentation and Process Control
00:00
Chapter 6: Aptitude
-
6.1 Aptitude
00:00
E-Book – GATE – 21 ADDED SYLLA
-
E-Book
Practice Set – GATE – 21 ADDED SYLLA
-
Practice Set 1
-
Practice Set 2
Fluid Mechanics
Revision for GATE 2024
Chapter 1: Concept of Gateflix Revision
-
1.1 Concept of Gateflix Revision
00:00
Chapter 2: Mass Transfer
-
2.1 Introduction of Graphical Representation of LLE
00:00 -
2.2 Type of Distillation, Simple Distillation and Flash Distillation
00:00 -
2.3 Standard Questions Based on Simple Distillation and Flash Distillation
00:00 -
2.4 Steam Distillation and Standard Questions
00:00 -
2.5 Continuous Distillation Column and Mc-Cabe Thiele Method
00:00 -
2.6 Feed Condition & Feed Line
00:00 -
2.7 Total Reflux, Minimum Reflux Ratio and Special Cases
00:00 -
2.8 Efficiency, Azeotropic Distillation, Extractive Distillation
00:00 -
2.9 Standard Questions Based on Continuous Distillation
00:00 -
2.10 Introduction & Graphical Representation of LLE
00:00 -
2.11 Material Balance on Liquid-Liquid Contact Equipment
00:00 -
2.12 Standard Questions Based on LLE
00:00 -
2.13 Leaching Introduction & Material Balance Equation on SLE
00:00 -
2.14 Introduction, Adsorption Isotherms & Design of Adsorption Single Stage Equipment
00:00 -
2.15 Gate Questions
00:00
Chapter 3: Chemical Technology
-
3.1 Properties of Petroleum Products
00:00 -
3.2 Cracking
00:00 -
3.3 Reforming, Polymerization of Petroleum Products and Dearomatization
00:00 -
3.4 Petrochemical Industry & C1 to C4 Products
00:00 -
3.5 Inorganic & Natural Products
00:00
Chapter 4: Plant Design Economics
-
4.1 Introduction to PDE
00:00 -
4.2 Cost Estimation
00:00 -
4.3 Rate of Return
00:00 -
4.4 Discounted Cash Flow
00:00 -
4.5 Net Present Value
00:00 -
4.6 Break Even Analysis
00:00
Chapter 5: Heat Transfer
-
5.1 Heat Transfer
00:00
Chapter 6: Fluid Mechanics
-
6.1 Fluid Properties – II
00:00 -
6.2 Fundamentals
00:00 -
6.3 Physics of Euler’s Equation – I
00:00 -
6.4 GP
00:00
Chapter 7: Thermodynamics
-
7.1 Thermodynamics
00:00
E-Book – Fluid Mechanics
-
E-Book
Practice Set – Fluid Mechanics
-
Practice Set 1
-
Practice Set 2
Process Control
Chapter 1: Process Dynamics
-
1.1 Introduction
00:00 -
1.2 Input or Forcing Function
00:00 -
1.3 First Order System
00:00 -
1.4 Examples of First Order System
00:00 -
1.5 Second Order System
00:00 -
1.6 Transportation Lag
00:00 -
1.7 Control System
00:00 -
1.8 Types of Controllers
00:00
Chapter 2: Stability
-
2.1 Stability Based on Poles
00:00 -
2.2 Routh Stability Criteria
00:00 -
2.3 Frequency Response
00:00 -
2.4 Bode Plots
00:00 -
2.5 Bode Stability Criteria
00:00
Chapter 3: Tuning Method
-
3.1 Ziegler Nicholas Tuning Method
00:00 -
3.2 Cohen Coon Tuning Method
00:00
Chapter 4: Advanced Control Strategies
-
4.1 Cascade Controllers
00:00 -
4.2 Feed Forward Controllers
00:00
Chapter 5: Valve Characteristic
-
5.1 Valve Characteristic
00:00
Chapter 6: Inverse Response
-
6.1 Inverse Response
00:00
Chapter 7: Direct Acting & Reverse Acting Valve
-
7.1 Direct Acting & Reverse Acting Valve
00:00
Chapter 8: P & ID Symbols
-
8.1 P & ID Symbols
00:00
E-Book – Process Control
-
E-Book
Practice Set – Process Control
-
Practice Set 1
-
Practice Set 2
Practice and Doubt Session
Chapter 1: Engineering Mathematics
-
1.1 Engineering Mathematics
00:00
Chapter 2: Quantitative Aptitude
-
2.1 Quantitative Aptitude
00:00
Chapter 3: Process Control
-
3.1 Process Control
00:00
Chapter 4: Mass Transfer
-
4.1 Mass Transfer
00:00
Chapter 5: Fluid Machine
-
5.1 Fluid Machine
00:00
E-Book – Practice and Doubt Session
-
E-Book
Practice Set – Practice and Doubt Session
-
Practice Set 1
-
Practice Set 2
Mechanical Operations
Chapter 1: Characterization of Solid
-
1.1 Characterization of Solid
00:00
Chapter 2: Particle Size Analysis
-
2.1 Particle Size Analysis
00:00
Chapter 3: Laws of Comminution
-
3.1 Laws of Comminution
00:00
Chapter 4: Size Reduction of Solids
-
4.1 Size Reduction of Solids
00:00
Chapter 5: Solid Separation
-
5.1 Solid Separation
00:00
Chapter 6: Filtration and Sedimentation
-
6.1 Filtration and Sedimentation part-1
00:00 -
6.2 Filtration and Sedimentation part-2
00:00 -
6.3 Questions based on Filtration and Sedimentation
00:00
Chapter 7: Filtration and Sedimentation part-2
-
7.1 Filtration and Sedimentation part-2
00:00
Chapter 8: Questions based on Filtration and Sedimentation
-
8.1 Questions based on Filtration and Sedimentation
00:00
Chapter 9: Fluidization & Solid Separation
-
9.1 Fluidization & Solid Separation
00:00
E-Book – Mechanical Operations
-
E-Book
Practice Set – Mechanical Operations
-
Practice Set 1
-
Practice Set 2
Chemical Technology
Chapter 1: Petroleum
-
1.1 Introduction & Motivation
00:00 -
1.2 Petroleum & Classification of Crude Oil
00:00 -
1.3 Properties of Petroleum Products
00:00 -
1.4 Cracking
00:00 -
1.5 Reforming, Polymerization of Petroleum Products and Dearomatization
00:00 -
1.6 Liquid Fuel From Coal
00:00
Chapter 2: Petrochemical Industry
-
2.1 Basic of Petrochemical Industry
00:00 -
2.2 C1 Products
00:00 -
2.3 C2 Products
00:00 -
2.4 C3 Products
00:00 -
2.5 C4 Products
00:00
Chapter 3: Polymers
-
3.1 Types of Polymerization Based on Mechanism
00:00 -
3.2 Different Types of Polymerisation
00:00 -
3.3 Types of Polymer
00:00 -
3.4 Elastomers
00:00 -
3.5 Fibres
00:00
Chapter 4: Inorganic and Natural Product Industry
-
4.1 Sulphuric Acid Industry
00:00 -
4.2 Pulp and Paper Industry
00:00 -
4.3 Fertilizer Industry
00:00 -
4.4 Phosphate Fertilizers
00:00 -
4.5 Chlor Alkali Industry
00:00 -
4.6 Sugar Industry
00:00 -
4.7 Soap Industry
00:00 -
4.8 Oil and Fats
00:00 -
4.9 Steam Reforming of Methane
00:00 -
4.10 Nitrobenzene
00:00 -
4.11 Maleic Anhydride and Polyurethane
00:00 -
4.12 Some Important Processes
00:00
E-Book – Chemical Technology
-
E-Book
Practice Set – Chemical Technology
-
Practice Set 1
-
Practice Set 2
Plant Design and Economics
Chapter 1: Introduction & Cost Estimation
-
1.1 Introduction
00:00 -
1.2 Cost Estimation
00:00
Chapter 2: Depreciation
-
2.1 Concept Of Depreciation
00:00 -
2.2 Straight Line Method
00:00 -
2.3 Declining Balance Method
00:00 -
2.4 Double Declining Balance Method
00:00 -
2.5 Sum Of Years Digit Method
00:00
Chapter 3: Interest
-
3.1 Concept Of Interest
00:00 -
3.2 Simple Interest
00:00 -
3.3 Compound Interest
00:00 -
3.4 Continuous Interest
00:00 -
3.5 Annuity
00:00
Chapter 4: Profitability Analysis
-
4.1 Rate of Return
00:00 -
4.2 Discounted Cash Flow
00:00 -
4.3 Net Present Worth
00:00 -
4.4 Capitalized Costs
00:00 -
4.5 Payout Period
00:00
Chapter 5: Break Even Analysis & Optimization
-
5.1 Break Even Analysis
00:00 -
5.2 Optimization
00:00
Chapter 6: Capital Investment
-
6.1 Capital Investment
00:00
Chapter 7: Mechanical Design Of Equipments
-
7.1 Mechanical Design Of Equipments
00:00
E-Book – Plant Design and Economics
-
E-Book
Practice Set – Plant Design and Economics
-
Practice Set 1
-
Practice Set 2
Mass Transfer
Chapter 1: Introduction of Mass Transfer
-
1.1 Basics of Mass Transfer
00:00 -
1.2 Definition and Classification of MT
00:00
Chapter 2: Molecular Diffusion
-
2.1 Diffusion and Fick’s First Law of Diffusion
00:00 -
2.2 Diffusion and Fick’s First Law of Diffusion Part 2
00:00 -
2.3 Unicomponent Diffusion
00:00 -
2.4 Equimolar Counter Diffusion
00:00 -
2.5 Standard Questions on Unicomponent Diffusion
00:00 -
2.6 Standard Question Based on Equimolar Counter Diffusion
00:00 -
2.7 Stefan’s Equation and Standard Question
00:00 -
2.8 Diffusion in Liquids and Diffusion Coefficient
00:00 -
2.9 Diffusion in Multicomponent Mixtures and Diffusion in Liquid
00:00 -
2.10 Standard Question Based on Diffusion in Liquid and Multicomponent Mixtures
00:00 -
2.11 Diffusion Through a Variable Cross Sectional Area and Diffusion in Solid
00:00 -
2.12 Standard Question Based on Diffusion Through a Variable Area
00:00
Chapter 3: Convective Mass Transfer
-
3.1 Introduction to Convective Mass Transfer Coefficient
00:00 -
3.2 Standard Question Based on Convective Mass Transfer Coefficient
00:00 -
3.3 Dimensionless Number
00:00 -
3.4 Analogy and Theories
00:00 -
3.5 Standard Questions Based on Convective Mass Transfer
00:00
Chapter 4: Interphase Mass Transfer
-
4.1 Introduction & Concentration Profile of Interphase Mass Transfer
00:00 -
4.2 Overall Mass Transfer Coefficient
00:00 -
4.3 Standard Question Based on Overall Mass Transfer Coefficient
00:00 -
4.4 Material Balance in a Contact Equipment
00:00 -
4.5 Standard Question Based on Kremser’s Equation
00:00
Chapter 5: Gas Absorption
-
5.1 Gas Absorption
00:00 -
5.2 Design of Packed Bed Tower
00:00 -
5.3 Standard Questions Based on Gas Absorption
00:00
Chapter 6: Drying
-
6.1 Introduction and Definition of Process Variables Air Drying
00:00 -
6.2 Rate of Drying Curve and Time of Drying
00:00 -
6.3 Standard Question Based on Drying
00:00
Chapter 7: Distillation
-
7.1 Introduction of Graphical Representation of LLE
00:00 -
7.2 Type of Distillation, Simple Distillation and Flash Distillation
00:00 -
7.3 Standard Questions Based on Simple Distillation
00:00 -
7.4 Steam Distillation and Standard Questions
00:00 -
7.5 Continuous Distillation Column and McCabe Thiele Method
00:00 -
7.6 Feed Condition & Feed Line
00:00 -
7.7 Total Reflux, Minimum Reflux Ratio and Special Cases
00:00 -
7.8 Efficiency, Azeotropic Distillation, Extractive Distillation
00:00 -
7.9 Standard Questions Based on Continuous Distillation
00:00
Chapter 8: Liquid-Liquid Extraction
-
8.1 Introduction & Graphical Representation of LLE
00:00 -
8.2 Material Balance on Liquid-Liquid Contact Equipment
00:00 -
8.3 Standard Question Based on LLE
00:00
Chapter 9: Solid-Liquid Extraction
-
9.1 Leaching Introduction and Material Balance Equation on SLE & Standard Questions
00:00
Chapter 10: Adsorption
-
10.1 Introduction, Adsorption Isotherms & Design of Adsorption Single Stage Equipment
00:00
Chapter 11: Humidification and Dehumidification
-
11.1 Introduction, Process Variable & Standard Questions
00:00 -
11.2 GATE Questions
00:00
Chapter 12: Membrane Separations – Mass Transfer
-
Membrane Separations – Mass Transfer
00:00
E-Book – Mass Transfer
-
E-Book
Practice Set – Mass Transfer
-
Practice Set 1
-
Practice Set 2
Chemical Reaction Engin
Chapter 1: Conversion, Rate of reaction, Rate law, Elementary and Non-elementary reactions, Type of reaction systems
-
1.1 Conversion, Rate of reaction, Rate law, Elementary and Non-elementary reactions, Type of reaction systems
00:00
Chapter 2: Derivation of integrated rate expression for CVRS systems, Reversible reactions (CVRS), Half life of a reaction (CVRS)
-
2.1 Derivation of integrated rate expression for CVRS systems, Reversible reactions (CVRS), Half life of a reaction (CVRS)
00:00
Chapter 3: Integrated rate expression for variable volume reaction system, Questions
-
3.1 Integrated rate expression for variable volume reaction system, Questions
00:00
Chapter 4: Parallel reactions, series reaction, Effect of temperature on rate, Ideal reactors, Ideal batch reactors, Flow reactors
-
4.1 Parallel reactions, series reaction, Effect of temperature on rate, Ideal reactors, Ideal batch reactors, Flow reactors
00:00
Chapter 5: Flow reactors, Ideal plug flow reactors, Selection of reactor
-
5.1 Flow reactors, Ideal plug flow reactors, Selection of reactor
00:00
Chapter 6: Multiple reactor system
-
6.1 Multiple reactor system
00:00
Chapter 7: Heterogeneous Reactions
-
7.1 Heterogeneous Reactions
00:00
Chapter 8: Previous Years GATE Problems
-
8.1 Previous Years GATE Problems Part-1
00:00 -
8.2 Previous Years GATE Problems Part-2
00:00
Chapter 9: Pressure drop through packed bed, Flow past through impressed body, Terminal velocity
-
9.1 Pressure drop through packed bed, Flow past through impressed body, Terminal velocity
00:00
Chapter 10: Flow Meter
-
10.1 Flow Meter Part – 1
00:00 -
10.2 Flow Meter Part – 2
00:00 -
10.3 Flow Meter, Pipe, Fitting Valves, Pumps and Compressor
00:00 -
10.4 GATE Questions from Pump, Compressor and Centrifugal Pump
00:00
Chapter 11: Advanced Topic – Boundary Layer, Non-Dimensional Number, Shell Balance and Velocity Vector
-
11.1 Advanced Topic – Boundary Layer, Non-Dimensional Number, Shell Balance and Velocity Vector
00:00
E-Book – Chemical Reaction Engin
-
E-Book
Practice Set – Chemical Reaction Engin
-
Practice Set 1
-
Practice Set 2
Process Calculations
Chapter 1: Units and Dimensions
-
1.1 Units and Dimensions
00:00
Chapter 2: Ideal Gas and Material Balance
-
2.1 Ideal Gas and Material Balance
00:00
Chapter 3: Material Balance (Continued…)
-
3.1 Material Balance (Continued…)
00:00
Chapter 4: Material Balance On Multiple Units
-
4.1 Material Balance On Multiple Units-1
00:00
Chapter 5: Material Balance With Chemical Reaction
-
5.1 Material Balance With Chemical Reaction-1
00:00
Chapter 6: Material Balance with Chemical Reaction (Continued…)
-
6.1 Material Balance with Chemical Reaction (Continued…)
00:00
Chapter 7: Lecture
-
7.1 Lecture
00:00
Chapter 8: Lecture 8
-
8.1 Lecture 8
00:00
E-Book – Process Calculations
-
E-Book
Practice Set – Process Calculations
-
Practice Set 1
-
Practice Set 2
Verbal Ability
Chapter 1: Noun
-
1.1 Noun
00:00
Chapter 2: Pronoun
-
2.1 Pronoun
00:00
Chapter 3: Subject And Verb Agreement
-
3.1 Subject-And-Verb-Agreement
00:00
Chapter 4: Tenses
-
4.1 Tenses
00:00
Chapter 5: Modifiers
-
5.1 Modifiers -1
00:00 -
5.2 Modifiers -2
00:00
Chapter 6: Vocabulary Building
-
6.1 Linking word technique
00:00 -
6.2 Root word technique
00:00 -
6.3 Types of vocabulary questions
00:00 -
6.4 Synonyms
00:00 -
6.5 Antonyms
00:00 -
6.6 Homophones
00:00 -
6.7 Various Exam questions and practice question
00:00
Chapter 7: Verbal Logic
-
7.1 Course of Action
00:00 -
7.2 Critical Reasoning
00:00 -
7.3 Summary Type Questions
00:00 -
7.4 Deductive Logic & Logical Consistency
00:00
Chapter 8: Reading Comprehension (RC)
-
8.1 Introduction to Reading Comprehension
00:00 -
8.2 Reading Comprehension – Tones
00:00 -
8.3 Reading Comprehension – How to Solve Question
00:00
Chapter 9: Articles & Prepositions
-
9.1 Articles & Prepositions
00:00
E-Book – Verbal Ability
-
E-Book
Practice Set – Verbal Ability
-
Practice Set 1
-
Practice Set 2
Logical Reasoning
Chapter 1: Series
-
1.1 Series
00:00
Chapter 2: Coding And Decoding
-
2.1 Coding And Decoding
00:00
Chapter 3: Analytical Reasoning (AR) or Data Arrangement
-
3.1 Analytical Reasoning (AR) or Data Arrangement
00:00
Chapter 4: Blood Relations
-
4.1 Blood Relations
00:00
Chapter 5: Calendars
-
5.1 Calendars
00:00
Chapter 6: Data Interpretation
-
6.1 Clock
00:00 -
6.2 Data Interpretation
00:00
Chapter 7: Directions
-
7.1 Directions
00:00
Chapter 8: Syllogism
-
8.1 Syllogism
00:00
E-Book – Logical Reasoning
-
E-Book
Practice Set – Logical Reasoning
-
Practice Set 1
-
Practice Set 2
Heat Transfer
1. Introduction of Heat Transfer
-
1.1 Introduction of Heat Transfer (Difference between heat transfer & thermodynamics, Modes of Heat Transfer and Variation of Thermal Conductivity)
00:00 -
1.2 Introduction of Heat Transfer (Laws of Heat Transfer)
00:00
2. Conduction
-
2.1 Conduction (Through a Slab, Electrical Analogy of Heat Transfer, Conductive Thermal Resistance and through composite Slab)
00:00 -
2.2 Conduction (Convection Thermal Resistance, Conduction-Convection Heat Transfer through a composite Slab, Overall Heat Transfer Co-efficient and some examples)
00:00 -
2.3 Conduction (Radial Conduction Heat Transfer through a hollow cylinder & Composite Cylinder and an Example)
00:00 -
2.4 Conduction (Conduction Convection Heat Transfer through a Composite Cylinder and an Example)
00:00 -
2.5 Conduction (Generalized Conduction Equation and Thermal Diffusivity)
00:00 -
2.6 Conduction (Critical Radius of Insulation & Its Physical Significance and Some Examples)
00:00 -
2.7 Conduction (Heat Generation in a slab and an Example)
00:00 -
2.8 Conduction (Radial Conduction Heat Transfer through a Hollow Sphere, Critical Radius of Insulation for Spherical Condition and Variable Thermal Conductivity)
00:00 -
2.9 Conduction (Heat Generation in Cylinder or Wire and an Example based on internal Heat Generation)
00:00 -
2.10 Previous year Gate Question
00:00 -
2.11 Previous year Gate Question
00:00 -
2.12 Previous year Gate Question (CH)
00:00
3. Extended Surfaces (Fins) and Unsteady State Heat Conduction
-
3.1 Basics of Heat Transfer through Extended Surfaces (Fins)
00:00 -
3.2 Analysis of Rectangular Fin having Infinite Length
00:00 -
3.3 Analysis of Rectangular Fin having Finite Length and Insulated at its Tip
00:00 -
3.4 Analysis of Rectangular Fin having Finite Length and Convicted Heat from its Tip
00:00 -
3.5 Heat Transfer through Rod Connected to Heat Source at Different Temperature
00:00 -
3.6 Infinite Long Fin Approximation
00:00 -
3.7 Fins Efficiency and Effectiveness
00:00 -
3.8 Unsteady State (Transient) Heat Conduction
00:00 -
3.9 Examples based on Unsteady State Heat Conduction
00:00 -
3.10 Fins and Unsteady Gate Questions
00:00
4. Heat Exchangers
-
4.1 Basics Concepts and Classification of Heat Exchanger
00:00 -
4.2 Temperature Profile of Heat Exchanger
00:00 -
4.3 Logarithmic Mean Temperature Difference
00:00 -
4.4 Example Based on Logarithmic Mean Temperature Difference
00:00 -
4.5 Special Cases Regarding Logarithmic Mean Temperature Difference
00:00 -
4.6 Design of Heat Exchanger by Logarithmic Mean Temperature Difference Method
00:00 -
4.7 Effectiveness of Heat exchangers
00:00 -
4.8 Effectiveness of Parallel and Counter Flow Heat exchangers
00:00 -
4.9 Design of Heat Exchanger by Effectiveness-NTU Method
00:00 -
4.10 Previous year Gate Question
00:00 -
4.11 Previous year Gate Question
00:00
5. Design of Heat Exchangers
-
5.1 Design of Heat Exchanger (CH)
00:00 -
5.2 Design of Heat Exchanger (CH)
00:00 -
5.3 Design of Heat Exchanger (CH)
00:00 -
5.4 Design of Heat Exchanger (CH)
00:00 -
5.5 Design of Heat Exchanger (CH)
00:00 -
5.6 Design of Heat Exchanger (CH)
00:00 -
5.7 Design of Heat Exchanger (CH)
00:00
6. Radiation
-
6.1 Fundamentals of Thermal Radiation
00:00 -
6.2 Basic Definition/Terminologies of Thermal Radiation
00:00 -
6.3 Laws of Thermal Radiation (Kirchhoff, Planck, Wiens displacement, Stefan-Boltzmann & Lambert Cosine)
00:00 -
6.4 Shape Factor (Concept of shape factor & Shape factor Relations like Reciprocity, Summation, superposition & Symmetry)
00:00 -
6.5 Radiation Network & Radiation Exchange
00:00 -
6.6 Radiation Shields & Radiation effect in Temperature Measurement
00:00 -
6.7 Previous year Gate Question
00:00 -
6.8 Previous year Gate Question
00:00
7. Convection
-
7.1 Introduction to Convection Heat Transfer
00:00 -
7.2 Basics of Forced Convection Heat Transfer
00:00 -
7.3 Thermal Boundary Layer Concept
00:00 -
7.4 External Forced Convection (Flow over a flat plate)
00:00 -
7.5 Internal Forced Convection (Flow through Pipe or duct)
00:00 -
7.6 Natural or Free Convection-1
00:00 -
7.7 Convection Topic (CH)
00:00 -
7.8 Previous year Gate Question
00:00 -
7.9 Previous year Gate Question
00:00 -
7.10 Previous year Gate Question (CH)
00:00 -
7.11 Previous year Gate Question (CH)
00:00 -
7.12 Previous year Gate Question (CH)
00:00 -
7.13 Previous year Gate Question (CH)
00:00 -
7.14 Previous year Gate Question (CH)
00:00 -
7.15 Previous year Gate Question (CH)
00:00 -
7.16 Previous year Gate Question (CH)
00:00
8. Overall Heat Transfer Coefficient
-
8.1 Overall Heat Transfer Coefficient
00:00
E-Book – Heat Transfer
-
E-Book
Practice Set – Heat Transfer
-
Practice Set 1
-
Practice Set 2
Thermodynamics
Chapter 1: Basics of Thermodynamics
-
1.1 Introduction(Evolution) of Thermodynamics (THERMO)
00:00 -
1.2 Thermodynamic System And Processes (THERMO)
00:00 -
1.3 Zeroth Law Of Thermodynamics & Thermometric Principle (THERMO)
00:00 -
1.4.(a) Thermodynamic Work Transfer (THERMO)
00:00 -
1.4.(b) Thermodynamic Work Transfer Question (THERMO)
00:00 -
1.5 Heat & First law of Thermodynamics (THERMO)
00:00 -
1.6 Heat Transfer for Various Processes (THERMO)
00:00 -
1.7 Steady Flow Energy And Work Flow (THERMO)
00:00 -
1.8 GATE Questions (THERMO)
00:00
Chapter 2: Second Law of Thermodynamics
-
2.1 Second Law Of Thermodynamics (THERMO)
00:00 -
2.2 Thermodynamic Temperature Scale (THERMO)
00:00 -
2.3 Entropy & Clausius Inequality (THERMO)
00:00 -
2.4 Physical Meaning Of Entropy (THERMO)
00:00 -
2.5 Gate Questions (THERMO)
00:00
Chapter 3: Available Energy/Exergy/Availability
-
3.1 Concept of Available Energy (Exergy) & change in Exergy due to finite Temperature Difference.
00:00 -
3.2 Exergy associated with K.E & P.E , Exergy change of a system ( Closed & Open) and Concept of Irreversibility.
00:00 -
3.3 Second law efficiency & Solved examples on Exergy.
00:00 -
3.4 Gate questions on Exergy
00:00
Chapter 4: Thermodynamic Relation
-
4.1 Thermodynamic Relation
00:00 -
4.2 Joule-Thompson Coefficient , Clapeyron and Clausius-clapeyron equation
00:00 -
4.3 Solved Examples on Thermodynamic Relation
00:00 -
4.4 Gate Questions on Thermodynamic Relation
00:00 -
4.5 Thermodynamic Properties Of Fluid I
00:00 -
4.6 Thermodynamic Properties Of Fluid II
00:00
Chapter 5: Pure Substances
-
5.1 Concept of Pure substance & Table and Charts like P-V , T-S & P-T Plot
00:00 -
5.2 Properties of Pure Substance and its Calculation , H-S Plot
00:00 -
5.3 Ideal gas equation
00:00 -
5.4 Behavior of Ideal & Real gases and Reduced temperature & Pressure Concept.
00:00 -
5.5 Examples on Properties of Pure Substance
00:00 -
5.6 Gate Question on Properties of Pure Substance.
00:00
Steam Turbine
-
Steam Turbine
00:00
Gate Questions (Thermodynamics)
-
Gate questions -1
00:00 -
Gate questions -2
00:00 -
Gate questions -3
00:00 -
Gate questions -4
00:00 -
Gate questions -5
00:00
Chapter 6: Solution Thermodynamics
-
6.1 Fundamental Property Relation
00:00 -
6.2 Chemical Potential And Phase Equilibria
00:00 -
6.3 Partial Properties
00:00 -
6.4 Gibb’s Duhem Equation
00:00 -
6.5 Relation Among Partial Properties
00:00 -
6.6 Ideal Gas Mixture Model
00:00 -
6.7 Fugacity & Fugacity Coefficient
00:00
Chapter 7: Vapour Liquid Equilibrium
-
7.1 Degree Of Freedom
00:00 -
7.2 Raoult’s Law
00:00 -
7.3 Henry’s Law
00:00 -
7.4 Modified Raoult’s Law
00:00
E-Book – Thermodynamics
-
E-Book
Practice Set – Thermodynamics
-
Practice Set 1
-
Practice Set 2
(Latest) Process Calculation
Chapter 1: Units and Dimensions
-
1.1 Units and Dimensions
00:00
Chapter 2: Process Variables
-
2.1 Process Variables
00:00
Chapter 3: Piezometer & Manometer
-
3.1 Piezometer & Manometer
00:00
Chapter 4: Degree Of Freedom Analysis
-
4.1 Degree Of Freedom Analysis
00:00
Chapter 5: Material Balance Without Chemical Reaction
-
5.1 Material Balance Without Chemical Reaction
00:00
Chapter 6: Material Balance With Chemical Reaction
-
6.1 Material Balance With Chemical Reaction – 3 videos
00:00
Chapter 7: Combustion and Energy Balance Equation
-
7.1 Combustion and energy balance equation
00:00
Chapter 8: Gate Questions
-
8.1 Gate Question
00:00
E-Book – (Latest) Process Calculation
-
E-Book
Practice Set – (Latest) Process Calculation
-
Practice Set 1
-
Practice Set 2
(Latest) Heat transfer
Chapter 1: Introduction
-
1.1 Introduction
00:00
Chapter 2: Conduction
-
2.1 Conduction Part-1
00:00 -
2.2 Conduction Part-2
00:00
Chapter 3: Convection
-
3.1 Convection
00:00
Chapter 4: Gate Questions
-
4.1 Gate Questions Part-1
00:00 -
4.2 Gate Questions Part-2
00:00 -
4.3 Gate Questions Part-3
00:00
E-Book – (Latest) Heat transfer
-
E-Book
Practice Set – (Latest) Heat transfer
-
Practice Set 1
-
Practice Set 2
(Latest) Chemical Technology
Chapter 1: (Latest) Chemical Technology
-
1.1 (Latest) Chemical Technology
00:00
E-Book – (Latest) Chemical Technology
-
E-Book
Practice Set – (Latest) Chemical Technology
-
Practice Set 1
-
Practice Set 2
Student Ratings & Reviews
No Review Yet
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹118.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹Free.00 for 1 month
0 Lessons
From: ₹118.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹118.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹588.00 for 1 month
0 Lessons
From: ₹118.00 for 1 month
0 Lessons
From: ₹118.00 for 1 month
